ARES
Home Page

ARES
800-421-1266

 
 

Heating Components

Most businesses and industrial operations that power exhaust air, face complex problems such as loss of temperature control, negative pressure, excessive drafts and the infusion of dirt, allergens and insects. ARES heated make-up air systems replace exhaust air with clean, filtered, tempered air: for all seasons. ARES system is designed to operate with minimum energy consumption, maximizing cost savings.

To provide truly year round comfort, ARES manufactures a comprehensive line of quality heating components, designed as an integral component of its total make-up air system.

Available are:

Gas Heated Units

Direct fired - (19,000 - 2,300,000 BTUs)
Indirect fired - (175,000 through 1,200,000 BTUs)

ARES indirect gas fired heat exchanger units are manufactured from stainless steel,
and come with a 5 year guarantee... the best guarantee in the industry.

Hydronic Units (Please consult factory for correct sizing)
Hot Water or Steam

Electrically Heated Units -(from 10 to 120KW)

All ARES Heated Make-up Air Units are quality designed and ruggedly built using durable industrial duty components. The cabinets are manufactured from Galvanized G-90 steel, utilizing 18 and 20 gauge aterials. To reduce vibration and noise, and to assure years of trouble free dependability, motors are suspension mounted and are designed with lifetime, prelubricated stainless steel ball bearings.

Depending on specific model chosen, heating capacities range from 19,000 BTUs to 2,300,000 BTUs.

Gas

Gas

» 175,000 through 1,200,000 BTUs
» 1,200 to 16,000 CFM
» 2 stage temperature control standard
» Optional single stage and electronic modulation
» 0" bottom clearance to combustible
» 400 series 20 gauge stainless steel heat exchanger
» Power venting standard
» Natural or LP gas
» Hot surface ignition
» 5-year heat exchanger warranty
» AGA and CGA approved

Electric

Electric

» 10-120KW
» Nickel/chromium elements
» 1-5 step controllers
» ETL certified

Hydronic

Hydronic

» 1,000 to 8,000 CFM
» Steam or hot water units
» Specialty coils optional
» Copper tube, aluminum fin coils standard
» ARI certified coils

Direct fired

Direct Fired

» 19,000 to 2,500,000 BTUs
» 900 to 22,000 CFM
» Maxon burner
» Maxitrol controls
» Draw through configuration
» FM and IRI controls available
» 30 to 1 turn down modulation
» UL and CUL Listed Unit


ARES
14716 South Broadway
Gardena, California 90248
800-421-1266

Phone: 310-532-1555 | FAX: 310-324-3030
EMail: aresinfo@marsair.com

 

© 2000 MARS AIR PRODUCTS, all rights reserved
LTG&A, Inc.